双激光脉冲打靶形成Gd等离子体的极紫外光谱辐射

高端芯片制造所需要的极紫外光刻技术位于我国当前面临35项"卡脖子"关键核心技术之首.高转换效率的极紫外光源是极紫外光刻系统的重要组成部分.本文通过采用双激光脉冲打靶技术实现较强的6.7 nm极紫外光输出.首先,理论计算Gd¹⁸⁺—Gd²⁷⁺离子最外层4d壳层的4p-4d和4d-4f能级之间跃迁、以及Gd¹⁴⁺—Gd¹⁷⁺离子最外层4f壳层的4d-4f能级之间跃迁对波长为6.7 nm附近极紫外光的贡献.其后开展实验研究,结果表明,随着双脉冲之间延时的逐渐增加,波长为6.7 nm附近的极紫外光辐射强度呈现先减弱、后增加、之后再减弱的变化趋势,在双脉冲延时为100 ns处产生的极紫外光辐射最强.并且,在延时为100 ns处产生的光谱效率最高,相比于单脉冲激光产生的光谱效率提升了33%.此外,发现双激光脉冲打靶技术可以有效地减弱等离子体的自吸收效应,获得的6.7 nm附近极紫外光谱宽度均小于单激光脉冲打靶的情形,且在脉冲延时为30 ns时刻所产生的光谱宽度最窄,约为单独主脉冲产生极紫外光谱宽度的1/3.同时...     

四方体MgO的制备及对有机染料的吸附

以六水氯化镁和六次甲基四胺为原料,采用水热法合成四方体MgO,考察其对有机染料甲基橙和亚甲基蓝的吸附行为.通过TGA-DTA、SEM、XRD、N2-sorption和FT-IR等手段表征样品.结果表明,原料浓度、温度和表面活性剂对四方体MgO结构的形成影响较小,而反应时间的延长有助于有序结构的组装.温度170℃、时间24h、MgCl2·6H2O与C6H12N4浓度比为1∶2和表面活性剂PVP是制备四方体MgO的最佳条件.在溶液浓度10mg · L-1的单一吸附实验过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为91.3;和22.3;,吸附过程均为单层吸附且符合Langmuir等温吸附模型和伪二级吸附动力学方程.在溶液浓度40 mg·L-1、甲基橙和亚甲基蓝浓度比3∶1的混合溶液吸附过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为80.1;和97.9;.     

Metabolomic analysis of raw Pinelliae Rhizoma and its alum‐processed products via UPLC–MS and their cytotoxicity

Alum‐processing is a traditional method to attenuate the toxicity of Pinelliae Rhizoma (tubers of Pinellia ternate, PT). The present study aimed at investigating the chemical and cytotoxic changes during alum processing. Metabolomic profiles of raw and alum‐processed PT were studied based on ultra‐performance liquid chromatography coupled with Orbitrap mass spectrometry. More than 80 chemicals in positive MS mode and 40 chemicals in negative MS mode, such as organic acids, amino acids, glucosides and nucleosides, were identified after multivariate statistical analysis, including principal component analysis and orthogonal partial least‐square discriminant analysis. Almost all of the identified chemical markers were significantly decreased ~10‐ to 100‐fold after alum processing. Meanwhile, the correlations between the chemical markers were assimilated to a positive coefficient from disorderly distribution during the processing. Raw PT extracts could inhibit the proliferation of human carcinoma cells (HCT‐116, HepG2, and A549) at the rate of 40.5, 24.8 and 31.6% more strongly than processed PT. It was concluded that the alum processing of PT could decrease the number of actively water‐soluble principles at the same time as decreasing toxicity. Given the water‐insoluble property of toxic calcium oxalate raphides in PT, we suggest that a more scientific processing method should be sought.     

Progress in DNA Aptamers as Recognition Components for Protein Functional Regulation

Proteins play a central role in all domains of life, and precise regulation of their activity is essential for understanding the related biological processes and therapeutic functions. Nucleic acid aptamers, the molecular recognition components derived from systematic evolution of ligands by exponential enrichment(SELEX), can specifically identify proteins with antibody-like recognition characteristics and help to regulate their activity. This minireview covers the SELEX-based selection of protein-binding aptamers, membrane protein analytical techniques based on aptamer-mediated target recognition, aptamer-mediated functional regulation of proteins, including membrane receptors and non-membrane proteins(thrombin as a model), as well as the potential challenges and prospects regarding aptamer-mediated protein manipulation, aiming to supply some useful information for researchers in this field.     

Synergistic Surface Passivation of CH3NH3PbBr3 Perovskite Quantum Dots with Phosphonic Acid and (3-Aminopropyl)triethoxysilane

CH₃NH₃PbBr₃ perovskite quantum dots (PQDs) are synthesized by using four different linear alkyl phosphonic acids (PAs) in conjunction with (3-aminopropyl)triethoxysilane (APTES) as capping ligands. The resultant PQDs are characterized by means of XRD, TEM, Raman spectroscopy, FTIR spectroscopy, UV/Vis, photoluminescence (PL), time-resolved PL, and X-ray photoelectron spectroscopy (XPS). PA chain length is shown to control the PQD size (ca. 2.9–4.2 nm) and excitonic absorption band positions (λ=488–525 nm), with shorter chain lengths corresponding to smaller sizes and bluer absorptions. All samples show a high PL quantum yield (ca. 46–83 %) and high PL stability; this is indicative of a low density of band gap trap states and effective surface passivation. Stability is higher for smaller PQDs; this is attributed to better passivation due to better solubility and less steric hindrance of the shorter PA ligands. Based on the FTIR, Raman, and XPS results, it is proposed that Pb²⁺ and CH₃NH₃⁺ surface defects are passivated by R−PO₃²⁻ or R−PO₂(OH)⁻, whereas Br⁻ surface defects are passivated by R−NH₃⁺ moieties. This study establishes the combination of PA and APTES ligands as a highly effective dual passivation system for the synergistic passivation of multiple surface defects of PQDs through primarily ionic bonding.     

Optical Radiation Associated with Photobiological Hazards for Argon GTAW Arcs

Plasma Chemistry and Plasma Processing - Gas tungsten arc welding (GTAW), a widely used industrial process, is one of the most intense artificial sources of optical radiation. This paper presents a...     

Synthesis,characterization, and electrochemistry of monophosphine‐containing diiron propane‐1,2‐dithiolate complexes related to the active site of [FeFe]‐hydrogenases

Five monophosphine‐substituted diiron propane‐1,2‐dithiolate complexes as the active site models of [FeFe]‐hydrogenases have been synthesized and characterized. Reactions of complex [Fe₂(CO)₆{μ‐SCH₂CH(CH₃)S}] ( 1 ) with a monophosphine ligand tris(4‐methylphenyl)phosphine, diphenyl‐2‐pyridylphosphine, tris(4‐chlorophenyl)phosphine, triphenylphosphine, or tris(4‐fluorophenyl)phosphine in the presence of the oxidative agent Me₃NO·2H₂O gave the monophosphine‐substituted diiron complexes [Fe₂(CO)₅(L){μ‐SCH₂CH(CH₃)S}] [L = P(4‐C₆H₄CH₃)₃, 2 ; Ph₂P(2‐C₅H₄N), 3 ; P(4‐C₆H₄Cl)₃, 4 ; PPh₃, 5 ; P(4‐C₆H₄F)₃, 6 ] in 81%–94% yields. Complexes 2 – 6 have been characterized by elemental analysis, spectroscopy, and X‐ray crystallography. In addition, electrochemical studies revealed that these complexes can catalyze the reduction of protons to H₂ in the presence of HOAc.     

氮化镓单晶生长研究进展

氮化镓(GaN)作为第三代宽禁带半导体核心材料之一,具有高击穿场强、高饱和电子漂移速率、抗辐射能力强和良好的化学稳定性等优良特性,是制作宽波谱、高功率、高效率光电子、电力电子和微电子的理想材料.受制于氮化镓单晶衬底的尺寸、产能及成本的影响,当前的GaN基器件主要基于异质衬底(硅、碳化硅、蓝宝石等)制作而成,GaN单晶衬底的缺乏已成为制约GaN器件发展的瓶颈.近年来,国内外在GaN单晶衬底制备方面取得了较大的进展.本文综述了氮化镓单晶生长的最新进展,包括氢化物气相外延法、氨热法和钠助熔剂法的研究进展,分析了各生长方法面临的挑战与机遇,并对氮化镓单晶材料的发展趋势讲行了展望.     

Towards Fabrication of Atomic Dopant Wires via Monolayer Doping Patterned by Resist-Free Lithography

Fabrication of atomic dopant wires at large scale is challenging.We explored the feasibility to fabricate atomic dopant wires by nano-patterning self-assembled dopant carrying molecular monolayers via a resist-free lithographic approach.The resist-free lithography is to use electron beam exposure to decompose hydrocarbon contaminants in vacuum chamber into amorphous carbon that serves as an etching mask for nanopatterning the phosphorus-bearing monolayers.Dopant wires were fabricated in silicon by patterning diethyl vinylphosphonate monolayers into lines with a width ranging from 1 μm down to 8 nm.The dopants were subsequently driven into silicon to form dopant wires by rapid thermal annealing.Electrical measurements show a linear correlation between wire width and conductance,indicating the success of the monolayer patterning process at nanoscale.The dopant wires can be potentially scaled down to atomic scale if the dopant thermal diffusion can be mitigated.     

Synthesis of [(3S,5R)-3-Hydroxy-5-methylpiperidin-1-yl](2-methylpyridin-3-yl)methanone

Russian Journal of Organic Chemistry - There remain challenges for effectively synthesizing heterocycles containing both piperidine and pyridine rings, mainly due to the inefficient synthetic...